~/Blog

Brandon Rozek

Photo of Brandon Rozek

PhD Student @ RPI studying Automated Reasoning in AI and Linux Enthusiast.

Quickly configuring and testing the Mosquitto MQTT broker

Published on

2 minute reading time

I’ve been playing with Tasmota smart devices recently; and to hook them up with home assistant, they both need to be configured to utilize MQTT. In this post, we’ll only focus on the MQTT part. From quickly installing it to making sure publish/subscribe messages work on another machine.

Installing MQTT Broker

On the server you want to install MQTT on:

sudo dnf install mosquitto

We won’t go over how to setup TLS or authenticated users. Instead for a quick test, we’ll configure it to allow for anonymous connections over any interface.

Add the following lines to /etc/mosquitto/mosquitto.conf

listener 1883
allow_anonymous true

Then enable the systemd service to start mosquitto

sudo systemctl enable --now mosquitto

Make sure it’s running:

sudo systemctl status mosquitto

Testing the Broker

Most tutorials have you test the publish/subscribe on the local machine. Though given we’re working with smart devices, we need to make sure it works on another machine first.

Approach 1: Install the mosquitto tools on that machine. Then you’ll need to open two terminals.

  • On terminal 1, subscribe to all messages mosquitto_sub -h [MQTT_BROKER_ADDR] -t "#"
  • On terminal 2, publish a message: mosquitto_pub -h [MQTT_BROKER_ADDR] -t "test" -m "Hello, World"

On the first terminal, you should see the string Hello, World.

Approach 2: Use curl.

  • On terminal 1, subscribe to all messages with curl mqtt://[MQTT_BROKER_ADDR]/%23 --OUTPUT - --trace -
  • On terminal 2, publish a message curl -d 'Hello, World' mqtt://[MQTT_BROKER_ADDR]/test/

Similarly, you should see the string Hello, World along with a bunch of debugging information.

Reply via Email Buy me a Coffee
Was this useful? Feel free to share: Hacker News Reddit Twitter